DT-FLY

The DT-FLY case is a cost-effective alternative to our DT-Case flagship. It comes in two different versions. The DT-FLY-Touch is tailor made for two  22“ Touchscreens (Hannspree HT225 or iiyama T2252MSC). The DT-FLY-FIT is designed for the combo "one 22 Touchscreen + the Waves FITcontroller". Both versions can be ordered with 1, 2 or 3U rackspace. Please note that the upper 1U/HE rackunit on the DT-FLY-Touch is not fully accessible, as the monitormount claims some space. The useable rackspace on the 1U/HE DT-FLY-Touch between the monitormount and rackpanels is 14cm from both sides. The DT-FLY-FIT has the full rackspace, even as 1U version. The DT-FLY comes with the same monitor arm/mount like on our DT-Case flagship and will also fit into our HC-Hardcase. Please look also into our DT-Case Accessories to make the most out of your setup!

DT-FLY Case specifications
Weight net: DT-FLY-Touch 1U: 4.4 kg, DT-FLY-FIT: 4.2 kg 
3U Version weight: DT-FLY-Touch: 4.9 kg, DT-FLY-FIT: 4.6 kg 
3U Version weight with 22" Hannspree HT225 and FIT-Controller: 12.4 kg

Dimensions 1U version (wide x height x deep): 53 x 23,5 x 44 cm
For 2 and 3U add 4.5cm per rackunit to the height.
Space beetween front and rear rackrails: 39 cm

Material: first grade baltic birch mpx wood

Finish: Three layers of water-diluted WARNEX 

Handrest: German oak wood 

Rackspace between the rack rails: 38 cm

Made in Germany

DT-FLY-Touch 2U for Behringer/Midas + Waves LV1

DT-FLY-Touch 1U, suitable for various mixing plattforms

DT-FLY-FIT 3U, with 17.3" portable touchscreen

DT-FLY-FIT 3U - total weight about 24kg

DT-FLY-FIT 3U

DT-FLY-Touch 2U/2HE, suitable for various mixing plattforms

DT-FLY-Touch 2U/2HE, suitable for various mixing plattforms

DT-FLY-Touch 2U/2HE, suitable for various mixing plattforms

DT-FLY-Touch 2U/2HE, suitable for various mixing plattforms

DT-FLY-Touch with 3U rackspace

DT-FLY-Touch with 2U rackspace and Monitorrail

DT-FLY-Touch 1U/HE - low weight & low price

DT-FLY-Touch 1U/HE 


DT-FLY-FIT 3U/HE 


DT-FLY-FIT 3U/HE - side view


DT-FLY-FIT - same monitormount like the DT-Case Flagship


DT-FLY-FIT 3U/HE  - This combination is just 12.4 kg 


DT-FLY-FIT 3U/HE - back


DT-FLY-FIT 3U/HE - only 4.6kg


DT-FLY-FIT 3U/HE - side view


DT-FLY-FIT 3U/HE - for iiyama or Hannspree 22" touchscreens


DT-FLY-TOUCH 3U/HE - front


DT-FLY-TOUCH 3U/HE - side view


DT-FLY-TOUCH 3U/HE - side view2


Avialable with 1, 2 and 3U/HE rackspace